Proven Ways To Keep Your Mac Cool and Active

Apple gives the users the benefit of working on a lightning-fast computing device. However, it’s the software and the hardware that gives you a super smooth working experience. But with persistent use, you may find that your device starts to overheat and act sluggish whenever you try to accomplish an important task.

These are everyday problems that every Mac user had to face. But, if you choose to ignore these issues, they can do some severe damage to your device, and you end up losing your device and the crucial data saved on it. So if you are also dealing with slow performance issues on your Mac, this short guide is for you.

To effectively deal with this problem to keep your de Mac cool and active, you’ll need to follow the instructions mentioned below. Let’s get started:

Make Sure The Fan Is Working Properly

A common reason for your Mac’s slow performance is the problem with the fan. Once the fan on the device starts to malfunction, your device starts to shut down unannounced. Every application you run takes twice as long to work. And this is not all. If you ignore the heating issue on your device for a long time, you may end up doing some severe damage to your device. Your hard drive can crash, and you will lose all the vital information you have saved on it.

For all these reasons, it becomes crucial to find the solution to this problem as soon as possible. Therefore, you can start by simply adjusting the fan speed of your device. To know how to control the fan speed on your device, you can follow this guide https://setapp.com/how-to/control-fan-speed here. Once you can adjust the fan speed, you can manually increase or decrease the fan speed whenever necessary. It’ll provide your device with a perfect reason to work efficiently. Further, enhancing the overall performance of your device.

Do Not Overcharge Your Mac

Excess of everything is bad. The same goes for your Mac. To keep your Mac cool and active, you need to be conscious of how much time you put your device on charge. Charging it in excess can put a strain on your battery that will ultimately decrease its lifespan. Moreover, it gives your device more reason to heat up, which affects the overall performance of your device.

To deal with this issue, you don’t have to follow a particular set of instructions. All you need to do is to be mindful of the duration you put your device on charge. So if you are working from home or office, make sure you turn off the charging as soon as you see the battery status above 80 percent. It will create a healthy charging routine for your device. This way, you’ll be extending the life of your Mac’s battery, which will save you from a lot of trouble in the long run.

To Sum It Up

If you are working on a Mac, there are many ways to enhance its performance. However, if you face a definite issue such as overheating of the device, make sure you handle it as soon as possible. Consequently, the fixes mentioned above will help you deal with Mac’s performance issues while giving your device to run smoothly for a very long time.

Read More»

5 Retro Arcade Games You Can Play On Your Computer

There’s something about playing retro-style games that takes us back to the good ol’ days when we could get sucked into a game for hours and stay up all night long - or until our parents yelled at us to go to bed! It takes us back to a time when we had little responsibility and few worries. These days, life is filled with stress, ups and downs, and everything that comes with being an adult. Retro arcade games that you can play on your computer are easy to find and they help relieve anxiety. Some even say they are great exercise for your brain, and help to improve your cognitive function! Here are a few you can play right now with no downloads or wait time.

Bubble Shooter

Bubble Shooter is super easy to learn how to play and can be very addictive. You can play it on your computer, but you can also download the app to your mobile device to play on the go when you don’t have an internet connection. It comes down to being as simple as a matching game. The game gives you a colored bubble that you shoot at a board filled with other colored bubbles. Your goal is to blast your bubble into two or more of the same color. This will send the bubbles popping away, and the fewer moves you use to blast the board away, the higher your score will be.

As you play, the game adds more rows of bubbles. If the bubbles reach the bottom of the board, the game is over and you can restart it. You’ll find out you can do bounce shots off the side of the game board to sneak your bubble into tricky spaces. The game lets you know what your next bubble color will be so you can plan out strategic moves. With such simple gameplay at your fingertips, Bubble Shooter is fun and easy to play.

You can find Bubble Shooter on Ilyon’s website and on Facebook.com. Both have quick links that immediately bring up the game for you to play. Share it with all your friends today! It’s completely free and requires no downloads.

Oregon Trail

Oregon Trail is a classic 90s computer came that you probably remember from your elementary school days. The graphics were blocky and pixelated, but historic scenarios were pretty solid for the early settlers. The archived version of this game is exactly the way you remember it, with plenty of rivers to ford, checking of your rations, trading to reach the Great Northwest, and of course, dying from dysentery. If you use your best reasoning skills, you just might make it to Oregon!

You can also see what the actual trail map to Oregon was like back in its hay day. While the Oregon Trail game may not be the most exciting and fast-moving retro game you can play, history buffs love it, and parents like it for the educational values it can teach their kids about the Old West. Just when you think you’re getting close to beating the game, virtual life can hit you like a ton of bricks with deadly illnesses and unexpected weather!

Power Pop Bubbles

Power Pop Bubbles is a matching game similar to Bubble Shooter, but the gameplay is pumped up with flashy graphics and cool booster items, like fireballs and bombs, that blow holes in the bubble game board. In this souped-up version, you can swap out your ammo bubble for another color to give yourself a competitive advantage. Use your strategic skills to do bounce trick shots and clear the bubbles. The game will keep giving you more challenging levels and puzzles to test your ability to keep up.

This game is available on mobile-only at this time but is very similar to the web-based Bubble Shooter game.

Brick Breaker Unicorn

Brick Breaker Unicorn is like a more colorful version of Pong. The colors and explosive action may cause your brain to double-take and become confused. But, if you love playing loud, colorful, random animal-themed penny games in Las Vegas, this is definitely a game for you. While the gameplay can get very busy, it’s a simple game to learn how to play. It’s free, there are no downloads, and you can get started playing right away without having to read instructions.

Instead of the Pong ‘paddles’, you have two unicorn heads with a bouncy carpet stretched between them at the bottom of your screen. When you click the screen once, a ball begins to shoot around and you can bounce it with your unicorn duo. Try to bounce it into the bricks until they are all broken. As the ball cracks the bricks, booster items are released that can equip your unicorns with blaster guns, added time, bonus hearts, and other fun items. Just don’t let your ball fall off the bottom of the screen, or you won’t get it back again. Each level presents new brick layouts and more challenges.

Stupid Zombies

This zombie game isn’t like others you’ve played that make your pulse race and your anxiety go up. It’s a lot like Angry Birds, in which you solve puzzles and challenges to eliminate all of the zombies. Luckily, the zombies don’t attack your character. Everything stands in one spot while your zombie apocalypse hero, who looks a lot like Rick from The Walking Dead, can take aim and shoot a bouncy bullet to take down the zombies.

As the levels progress, the game throws in some wooden crates, exploding barrels, and other items that can hinder or help your attempts to send the zombies back to their grave. With no downloads, you can easily get started playing it right now.

For those of us who don’t want to spend a few hundred dollars on expensive gaming systems, there is plenty of fun, retro arcade-style games for your computer that can satisfy your gaming itch. You can play them on PC equipment you already have at no extra cost.

About the Author:

Aaron Smith is an LA-based content strategist and consultant in support of STEM firms and medical practices. He covers new industry developments and helps companies connect with clients. In his free time, Aaron enjoys swimming, swing dancing, and sci-fi novels.

Read More»

How To Test A Computer Motherboard And CPU For Failures At Home

The motherboard and CPU are the heart and soul of your computer system.

They enable your computer components to connect and enable all the processes that make your computer work efficiently.

The motherboard is the hub for all the circuit boards that connect the system parts together. Your computer’s main drive sits inside the motherboard.

The CPU connects to the motherboard. It sends signals to the computer’s memory, hard drives and other critical parts that make your computer work.

When the CPU fails, it may mean the system could be overheating or some inner connections may be loose.

A bad motherboard may cause the system to keep rebooting at odd times, or the system may crash altogether.

Other Causes Of Motherboard And CPU Failures

When the motherboard breaks down or fails to boot up, there may also be a number of reasons.

Some other signs of computer failure may include:

• Faulty or bulging connectors
• Burning on the motherboard or smells of burning when the computer is running
• Not enough power supply or voltage
• Imbalances in the computer’s internal cooling system
• Peripheral connectors may sometimes flash on and off
• Your computer is not reading your flash drives properly

While these issues can be daunting, there are some simple steps you troubleshoot at home using a multimeter.

A multimeter helps you get the correct measurement of your system’s resistance, voltage, and electrical current.

Here are some areas to check to see exactly what’s happening inside our computer system.

1. Check The Voltages

First, check to ensure the connections to the ATX pin and the AC power are in place.

Adjust the setting on a multimeter to read at least 20V of direct current.

Next, examine the exterior of the connector using the black multimeter probe.

Connect the black probe to the GDB Pins 15, to 17.

2. Test The Purple And Green Measurements

Test pins 9 and 14 with the red multimeter probe. Check for the measurements as follows:

• Purple, VSB Pin 9 – should read at least 5 volts.
• Green, PS on – Pin 14 voltage measurements should fall between 3 and 5 volts.

Turn on the PC’s power switch and let the PS_On value fall. If the value drops to any measurement besides O, it may mean there is a problem with the switch.

3. Troubleshoot Pin 8

Examine the gray, Power_Ok or Pin 8 switch with the red multimeter probe.

The measurements must read above 2 ½ volts and will indicate your system can start without any issues.

Next, reset the Pin by pressing the Power_Ok switch. The volts will fall to zero, and then gradually rise to the normal levels.

How To Test The Motherboard And PSU For Any Circuit Issues

1. Disconnect the computer from the AC current. Leave it for a few minutes to let the charge run out.

Adjust the multimeter to about 200 Ohm and connect the probe leads to set the meter to zero reading.

Connect both lead probes to the metal on the system’s chassis and ensure the reading also stays at zero.

2. The “On” and “Off” switches on your computer may also be faulty at times. Faulty switches may cause the system to break down.

Most computer systems operate by an ATX power source. The ATX current helps keep your motherboard running, even when the computer is switched off.

Take out the ATX connector from the motherboard. Hold the multimeter black probe onto the chassis metal plate.

In some cases, the power switch may have 2 or 4 wires.

To check the system with 2 wires, unplug the computer and use the multimeter’s probes to both wires.

Press the switch until the resistance starts to drop. Any resistance reading close to zero means the switch is working well.

Using the red lead multimeter probe, measure the volts on the direct current connector with the black wire pins.

Ensure each voltage has a zero reading.

If the switch has 4 wires, they will be distributed in clusters of two’s. They may also fall to the right and left of the motherboard, or they may sometimes be crossed.

First, unplug the computer. Test each wire cluster separately. Insert the button until the resistance readings fall to zero.

3. Check the colored wire readings

Hold the black lead probe on the metal chassis.

Examine the readings of the colored pins of the direct current (D/C) connector using the red multimeter probe lead.

4. Detach the CPU from the motherboard slot. Measure the pin numbers on the motherboard’s connector using the ATX 20-Pin chart guide.

Rest the black multimeter probe onto the chassis metal plate. Test the GND pins with the red multimeter lead.

Ensure Pins 3, 5, 7, 13, and 15 to 17 on the motherboard’s connector have a zero measurement.

If the reading is showing a number more than zero, it may mean there is a problem with the connector.

Check The Connectors

Your motherboard also has connections on the edges of the system that ensure power reaches your hard drives and CD-ROM drives.

Each connector has four pairs of wires (8 wires) located to the left and right sides of the motherboard.

They are in colors of red, yellow and black.

To troubleshoot for any faulty connectors, connect the black multimeter probes to the black wire, and the red probe to the red wire.

Each wire should have at least +5 volts of direct current.

Next, run a similar test by connecting the red multimeter probe to the yellow wire and the black probe to the black wire.

Ensure there’s a reading of at least +12 volts of direct current.

If any of the readings do not match up, there may be a faulty power supply or an overloaded periphery connection.

To test for normal voltage readings, detach all the connections and run the test again.

If the voltage falls within the normal ranges, use fewer peripheral connections or increase your watts of power.

If there are lower than normal voltage readings, you may need to disconnect and replace the power supply.

If you feel interested to test a computer motherboard and CPU for failures at home first you should buy a multimeter and check out for best budget multimeter on the browser and gain ideas on buying it.

About the Author:

I'm an experienced content writer with several thousand product reviews and guides written in the past few years. I work as a senior editor and writer on tools, home improvement equipment, the leading hunting site on the web with 25 million unique monthly visitors, but also do extensive blogging on the side.

Read More»

How To Keep Your Windows Computer Safe

Privacy and safety has always been a major concern if we talk about the cyber world. There was a time when we used to be worried about the money in our wallet or at our home but because of technology things are changed drastically and we started keeping everything online including money. And it’s not only money we also keep our personal and critical data on the computer. With the emerging cyber crime it becomes necessary to protect our computers from hackers who can misuse our identity or critical information because the ultimate purpose of creating or installing a malicious program is to use your compute for mala fied activates. In this article we will discuss that how you can keep your windows computer safe.

Helpful: 10 Best Useful Run Commands For Windows Users

1. Use Antivirus Software:

First thing which you should do to start preventing your computer from threats is installing an antivirus. If you do not want to purchase an expensive antivirus then going for a free antivirus is also a good idea which you can download for free and can keep updating to ensure the basic protection. If you are a normal internet user and rarely download content from websites then a free antivirus can work well for you. But if you do not want to download and wanna create yourself then you can check out here.

2. Firewall:

By default windows comes with firewall as you can understand by the name itself firewall is a safety wall which stops malicious content from reaching your computer. If this setting is turned off on your computer then by default you will see an alert message on the action centre to turn it on. Here is how you can check or turn on firewall settings on the windows computer.

• click on the action centre button given in the system tray (Flag icon)
• In the action center search for firewall. This will open firewall settings and on you will find windows firewall state which should be turned on.

• If windows firewall state is not turned on you can turn it on by clicking “Turn windows firewall on or off” given in the sidebar.

3. Updates:

Developers of windows are self aware of the treats roaming around the world so time to time they keep on releasing updates for your operating system which makes your system protective against these treat. All you need to do is to make it sure that automatic update is turned on and you keep installing all the updates on time.

4. Using RAM Cleaner Software:

Ram cleaner software can also work effectively to keep your windows computer safe. Actually an application which cleans RAM on your computer stops all the unwanted processes running in the background which allocate more RAM for antivirus software and thus it can effectively block all the threats in the real time.

5. Cloud Backup:

The perfect idea of being safe and protecting your critical data is to keeping it on the same place. These days you will find many reliable platforms which allows you to keep you data safe on the cloud storage the biggest advantage of keeping your data on the cloud is that it can be accessed from anywhere from any device another advantage is that companies which offers cloud storage keep advanced level security for the protection of data. So to keep you windows computer safe you can create an online backup of your critical data and free up the disk space. In case of any miss happening with you computer you can restore the data you have backed up online.

6. Download Files And Attachments Carefully:

You need to be extra careful about attachments and files. Only download attachments from the senders you know. When downloading a file from internet you should double check if it is the correct file and in the format it suppose to be most of the viruses and malicious programs travel as email attachments or downloads so it is the area which requires your extra attention.

So these were 5 tips which can help you to keep your windows computer Safe. Little bit of awareness can save you from potential losses of money and privacy so start following these tips today and enjoy computing with the peace of mind.

Read More»

How To Connect A Laptop Computer To A TV Using HDMI

There are many methods in which everyone could connect their laptop computer to their television nowadays. With most TV's being manufactured with HDMI connections, the problem most people find in knowing how to connect their laptop computer to their TV mistaken which cable method to choose. So, in order to simplify this process for you, here are basic methods in connecting your laptop computer to your television screen to allow you see your computer work through a bigger screen.

Connecting laptop computer to TV is basically very simple: all you need is the proper cable, that will enable you to set up the connection and you'll be watching content from your laptop on your television in less time. We'll take you through how to connect your laptop to a TV in this step-by-step method which HDMI connection. HDMI is one kind of connector and to know more about connectors you can visit sconect
.

HDMI Connection

High-Definition Multimedia Interface or (HDMI) is the best video and audio connection possible in today's technology for connecting a laptop to an HDMI-capable television. This type of connection is only possible if you have a TV HDMI connection. If you have a standard set classification TV, this option is not available to you. But, not commonly known is that your laptop must also be HDMI capable as well in order to transmit this type of signal to your TV. For the most part, HDMI cables tend to be more expensive than most connections - but the quality is far greater. If you have a USB cable, then using a USB to HDMI connection is possible.

Here is how to use an HDMI connection to connect your laptop to a TV so you can watch anything you wish to view on your laptop on your big TV screen. We'll also show you how to control your TV from your laptop.

There are two methods to this task: you can either mirror what is on your laptop's computer so that it displays on the TV, or set up the TV as a second screen, by extending your computer into a second display screen. In this article, we’ll explain step by step methods of connecting HDMI, as it is easy, and allows you to use your laptop as a control. (Imaging the content of your computer on your TV screen is a little difficult to set up because you need to set the best resolution for the TV with a workable resolution on the computer).

You'll need a laptop with an HDMI port and a TV with an HDMI input - basically, any TV will have one, but not all laptops have HDMI. Finally, you'll need an HDMI cable.

Any HDMI cable will work, one thing to consider, however, is that TVs have full-size HDMI inputs but not all laptops do.

Connect A Laptop Computer To A TV Using HDMI

1. Plug in the HDMI cable to the HDMI port at the back of the TV; notice the port you have plugged into. Then use your TV remote or the buttons on the frame scroll over the 'Inputs' until you get to the port. The screen should be blank.

2. Now you have to click on your laptop to send a signal down the HDMI port. In Windows, scroll into Control Panel and select 'Adjust screen resolution' from the list below 'Appearance and Personalization'. In the next screen, you will see two different displays. (If not, check that everything is physically connected properly).
If all is connected properly, you will be able to see different displays, one of which will be unable. This is the reason there is nothing to show on your TV screen. Using the laptop, click on the icon for the second monitor and select 'Extend the desktop onto this monitor'. Click 'Apply'. If it works you should now see a TV Windows image Windows desktop background picture on the TV. If not, don't panic - try again. Because for some reason, this process doesn't always work the first time.

3. Now you need to set the screen resolution of your second display on your laptop so that it looks bright on the TV. To do this simply selects the second display within 'Adjust screen resolution', and using the 'Resolution:' scroll-down; adjust the resolution until the desktop background images fit across the whole TV screen. What works best will depend on the aspect ratio and size of your TV, but you are aiming for 'high-definition', so start from the top and work down. You need a resolution not lower than 1280x720 to make this connection meaningful.

That's it, there are other inputs and options available to connect your computer to your TV, but HDMI is the cheapest, easiest, most commonly used options, and the image and sound quality are unbeatable.

Read More»

How Important Is Computer Forensics In Today's World

Technology is everywhere nowadays, and with that comes digital crimes. Computer forensics and examination plays an important role in digital crimes when it comes to gathering evidence, litigation, and prosecution. Computer forensics is a specialized science where investigators analyze the information of a suspect’s computer and search for evidence. This is a newer career field, but it is opening up because of the digital age we live in. A computer forensic investigator is very important when it comes to digital crimes as they are the ones who collect, analyze, and report the evidence. Read on more about how they play a pivotal role in catching criminals.

Obtaining Evidence

A computer forensic investigator can examine most types of digital media to identify, recover, preserve, and analyze the information that it contains. They deal with a lot of computer crimes - such as trade secrets, identity theft, fraud, child pornography, or homicides. Since computers are used in everyday life, it is important to collect as much information as possible about the suspect or victim through their digital media.

Obtaining the evidence must be done in a certain way or the examiner risks the evidence being thrown out during trial, which could make or break a case. Evidence is not always easy to discover as it may have been deleted on purpose by the suspect. An expert in computer forensics is able to recover this data and produce it in court as evidence. There are standards and procedures involved when obtaining evidence, so it is important these are followed otherwise the evidence can be thrown out of court. Again, this could be the difference between winning or losing a case.

It is imperative that an expert in the field handle digital evidence to preserve it as much as possible. Someone without in-depth knowledge of how computers or digital media work could accidentally erase evidence, causing the case to fail before it even starts. Furthermore, the examiners know where to look, what is important, and what can be ignored. It takes intense training to understand how to properly obtain digital evidence.

Search and Analyze

Experts in computer forensics can find evidence that goes beyond the surface. This includes management of an electronic file, tracking, or history in the computer. System information, such as when the file was accessed, modified, or created, can be printed out by the examiner and used as evidence in cases. This can help establish timelines or add knowledge to complicated crimes such as fraud or theft. It can get pretty complicated as the system information is changed every time the file is opened, so there is a lot of information to go through. The examiner will know what to look for, where to look for it, and what information can be left out. Data that is unimportant will be left alone and only the usable evidence will be focused on. This is vital when it comes to time-sensitive cases as you do not want investigators spending their time on unimportant items when other files contain the evidence needed to close the case.

Most often than not, the files examiners come across are not working or completely intact. An expert will be able to find data in places that others would not normally have access to. This can include finding partially deleted files on the hard drive and put them together to create the original document. Furthermore, by digging deep into the history, the examiner can figure out what path the user took on the computer to help figure out the meaning of the fragments of data. Putting all of the pieces together is part of a computer forensic investigator’s job and it also aids law enforcement in seeing the entire case from a digital standpoint.

Preservation

Once the evidence is collected and analyzed, it must be properly preserved. Digital evidence can be tricky to deal with because of an accidental alteration, or even an intentional one. Computer forensic examiners establish a chain of custody before any evidence is admitted into court.

Individual files can be compromised as well. Their data can be manipulated because it is changed every time the file is opened, so it may even be an accidental manipulation. A crucial step the examiner takes is capturing the image of the hard drive to ensure the files are protected and authenticated.

Computer forensics is extremely important in today’s world and especially in the litigation process. The examiners obtain evidence, analyze it, and preserve it so it can be properly presented in court. Furthermore, the examiners can interpret their findings for those who do not fully understand what they are looking at. This helps the attorneys, jurors, and the judge get a clearer picture of what crimes were committed.

About the Author:

Ken Wilson is a Tech Guru and Security Specialist at ThePCDoctor – Australia’s Number 1 Computer Support company.

Read More»

Tips To Find Your Computer’s IP Address Easily

In the present world, we are living in the era of the technological advancements and developments. So, communication between the people is getting increased through the internet. In fact, it is a network where anyone can access it for availing the benefits. When it comes to the concept of the network, you definitely cannot ignore some important terms and things. As the way, the IP address is one of the most crucial things which are needed to identify the computers and the systems in the highly effective manner. In this article, you will see the full details about the IP address and its functions easily.

Actually, an IP address is the numerical signs that are assigned to every device that are connected to the internet. In fact, this sequence of numbers is highly needed for the device to access the internet or the web easily. There are two kinds of IP addresses available and they are as follows.

• Private IP addresses
• Public IP addresses

As the way, the private IP address is the numbers that are assigned by the device manufacturer at the time you were buying. However, it can also be changed in the future for your purpose. They may be in range from the 192.168.0.0 to 192.168.255.255. However, each of the computer and device has its own IP address and let’s see how to find the best one in the easiest way.
When it comes to finding for your computer’s IP address, there are a variety of ways available and they are listed as below.

• Getting your public IP through the search engine
• Obtaining your public IP through the router settings
• Use the windows command prompt to get the IP address
• Getting your private IP through the windows using the network connections

How To Get Your Public IP Through The Search Engine And Router Settings?

If you want to get the public IP of your personal computer, then you can use the search engine. In fact, the search engine can provide the best ways to find your public or the external IP address in the most effective manner. In fact, this is the address of your router or the modem that can be seen by the rest of the internet.

As well as, you can also type as my IP address on the search bar and provide the enter key. It can show your public IP address easily.

Furthermore, you can also access the router settings to find your public IP address in the simplest manner. In fact, all the routers are accessed through the web interface and so you can change and adjust the settings easily. It is also better to check the documentation of the router to find your specific address.

Then, it is also possible to get the IP address on the internet port or the internet IP address section in the router status. In fact, the IP address is listed on that page and it may like as the 192.168.1.1.

In this way, you can use the search engine and the router settings to find out the public IP address of your computer in the simplest manner.

Use The Command Prompt To Find Out The IP Address Of Your Computer

It can also be effective to use the command prompt in your windows operating system at the time you need the IP address of your computer. For this purpose, you need to do the following things.

• As the way, you need to initially open the command prompt in your system through the run dialogue box.
• Once you have opened the command prompt, then you have to type as ‘ipconfig’ and provide the enter button.
• After that, it will show the list of your network connection information and so you can extract the IP address of your computer easily.
• As well as, it is also possible to find your IP address through the manufacturer of your network adapter.
• Same as the command prompt, you can also use the network connection to find your IP address in the most effective way. For this purpose, you have to type as ncpa.cl in your run dialogue
• box and provide the enter to open the window.
• You can click the status menu to view the connection status of your computer and it also resides with the IP address you have longed for.

As the same manner, the network details window can also provide the information about your network and the IP address and so you can access them for availing the benefits. In fact, the IP address is also provided based on the routers and modems you have bought. As the way, if you are using the Cisco branded routers, then your IP will 10.0.0.1. Otherwise, it is the Netgear and then its value may be 192.168.1.1. In this way, you can find the IP address of your computer in the easiest manner.

About the Author:

Hi , My name is Masha and I am is passionate about technology, internet marketing and I am writer who writes on computer technology questions like router settings, computer security, ip address and many more questions about computer problems.

Read More»

How To Check BIOS Version Information In Windows

BIOS stands for Basic Input and Output system. It’s the most important thing to run Softwares in your operating system. It plays a very important role to manage the connection between motherboard Hardware like processor, graphics card, Ram, hard drive etc in your computer. Time to time, Motherboard needs to upgrade BIOS to fix different issues and bugs. But to upgrade it, you must have to know about its version information before. Because every computer has different version of BIOS. If you’re thinking that your friend’s computer and yours have same BIOS then it’s wrong. Every computer system must have different versions. Well! If you wanna upgrade your system BIOS and wanna know which version is installed, so to know about it, below I’m sharing few simple ways. By following them, you can easily know about your system BIOS.

Ways To Check BIOS Version Information

Here are the three ways to check system BIOS information. No any third party software is required in these steps. Simply follow them perfectly and know about it. So let’s start, how can you check version information of your system BIOS.

1. From System Information Tools

System Information Tools is actually your internal tools of Windows to check full system configuration or details about your computer. This is one of the trusted and easy way to check your version information of BIOS. To check version information, first go to the Start menu and type in search run and press enter. When RUN opens, type msconfig32 and click on OK.


When you will click on OK then a folder will open. In this folder you can check your complete information about your computer. You can also see BIOS version information, below the processor information like below image.

2. From CMD

One of the finest way is CMD. You can find your version information of BIOS easily through CMD. To find information with CMD, first go to the Start and in search type run and press enter. When RUN opens, type cmd in this and click on 'OK'.


When a CMD command promt has been opened, then type below command in it and press enter.

wmic bios get smbiosbiosversion

When you will enter then it will take some time and will show your BIOS version. It shows version information always below 'SMBIOSBIOSVersion'. You can see an example in below image. You can check, my BIOS version is '786H1 v01.05' which is also showing below 'SMBIOSBIOSVersion'.

3. From Windows Registry Editor

If you don't want to use above methods, so you can also use the regular Windows Registry to get the BIOS version information. For looking your version information from Windows Registry, go to the Start and search type 'run' then press enter. You can also open RUN directly by pressing 'WIN+R'.


Once the RUN opened, type regedit and click on 'OK'.


After that navigate to the following key and you will find the BIOS version information next to the value 'SystemBiosVersion' in the right side.

HKEY_LOCAL_MACHINE/Hardware/Description/System

Conclusion

To find the version information of BIOS, sometimes it is very hard. But if you know simple ways or procedure to find BIOS version information then it's not diffcult for you. Above are some easy ways to find your system BIOS version information. You can easily find by following above 3 methods, if you don't know. In these methods, you don't have any additional software required. Just follow above.

Read More»

How To Become A Computer Genius or Expert

Due to the day by day successively growing foundations of IT (Information Technology), now everybody wants to become a computer expert especially our new generation or youngsters. So for that, they join computer institutes or different academies to become an expert of computer. But always remember, to learn anything you must have a passion for it. If you’ve a passion or dedication then you can learn anything or even everything without any external resources like academies, institutes etc.

To become a computer expert in today’s era, you don’t need now to do extra effort. Its 21st century and to learn anything else about, a majority of us don’t prefer books. We prefer to use the internet. This phrase has now become so old that nobody is better than a book. I accept that books are very good friend. But now internet is too. Internet is not just a good friend, it has another disguise, a devil face. Now it depends on us how we take it. As a negative friend or positive? If we use it to learn then it will give us lots of benefits in return. But if we use the internet for pornography or waste our time on facebook, twitter etc so we are losing ourselves.

Well! I just want to awake those who are wasting their valuable time on the internet. Those users who wanna become a computer expert to impress your family, friends etc so below I’m gonna share few basic and common ways to increase information about computer. Just follow below and increase your skills without facing any trouble.

Learn About Basic Hardwares

The first and basic stuff is try to learn about basic hardwares of computer. Because it is important. You should have knowledge about processor, RAM, Hard drive (HDD), Solid state drive (SSD), Graphics card (GPU) etc. Once you learnt about them then you can proceed to learn more easily. To do that, simply open your system case and try to check which type of RAM is installed DDR2, DDR3 or DDR4? Furthermore check your Processor, Hard drive, Graphics card etc. After that try to learn about operating system especially about Windows, Mac and Linux. Learn tricks and secrets of operating system (OS) and try to apply them. Search articles of How to’s on the internet and follow them. Please remember one thing that if you’re learning about tricks but not applying them so you’re wasting your time. Practically applying is necessary.

With learning about it, I have a recommendation for you that try to make friends who have knowledge and also learning like you. Because you can discuss and increase your knowledge from this way. Try to join computer related groups and communities on Facebook and Google+, and ask questions here and share knowledge as well. You can also like pages of tricks so that you can in touch with new updates.

Internet Is The Best Teacher

Internet is an excellent teacher. As we know if we search about anything else on the internet, so it gives us a specific best result. That’s why we can consider to internet as a good teacher. Try to make a habit that whenever you get free then search about new upcoming products like Graphics card, latest softwares, news about technology on the internet and try to increase your knowledge as much as possible for you. So first thing is to search on Google or Bing. Second is to be connect with social sites and join different groups for discussion and connectivity.

You can join different groups on Facebook, communities on Google+ and linkedIn. Similarly, try to add yourself in lists on Twitter which are related to computers, tech news etc and follow various computer experts.

Learn Programming or Other Languages

Learning about languages is another step to increase your skills. Because every computer expert knows computer languages like programming, web developing etc. Even hacking is good if you learn ethical hacking, otherwise not. But to do it, you must have to know about coding. Without coding, how can you do?

To learn computer languages, there are lots of institutes or academies but you have to pay money. So learn it through the internet. There are many books available on the internet that will definitely help you to learn about languages. Furthermore, there are also available many websites. You can create an account on them and start your programming course free online. Recently, I also wrote an article “3 Websites To Learn Free Programming And Coding Online”. So must check out my recommended sites and start your learning for programming from today.

Seek or Learn About Softwares and Applications

Understanding of softwares is extremely important. Because in today’s era, sofrwares are playing an important role in computers technology. So it’s important to know which software is used for what purpose. Learn about MS Office, Adobe, Sony Vegas etc. Different sites on the internet like Filehippo, CNET, Softonic etc are there that provide software legally without viruses or scams. So again saying internet is the best teacher. Search on the internet to know about softwares. Watch tutorials on youtube for quick learning.

Final Opinion

So these are some basic highlighted ways that will help you to become a computer expert. If you have a dedication and want to do hard work so you can do it easily. Actually it’s all about the priority and passion. You don’t have money but if you seriously want to become an expert of computer, just follow above. Once you started basic mentioned ways, after that you will be understood everything about it and you would be able to find more ways too.

Well! if you think this article is helpful for all who are interested in becoming computer expert, so do not forget to share it with them. If you also want to suggest some other ways or want to give us tips, so you can via comment below.

Check out more interesting articles: 

• How To Check Full System Specifications In Windows 
• Top 7 Programming Languages For Data Scientists To Learn 
• 5 Reasons Why Python Programming Is Most Useful 
• How To Create Your Own Antivirus Using Notepad 
• 5 Basic Tips To Increase Gaming Performance On PC

Read More»